|
|
| |
 Ethernet infrastructure components |
| |
Ethernet-Hubs and -Switches
The topology of an Ethernet IP network is different than that of TP/FT-10: For 10/100Base-T there are exclusively point-to-point connections at physical layer. If more than 2 devices shall communicate with each other, switches are recommended. Hubs, as multi port repeaters, have technical disadvantages compared to switches:
- Hubs ... transmit and und regenerate data packets
- Switches ... connecting 10MBit/s- resp.100MBit/s segments / channeling of network traffic / reducing of bus load |
|
| |
FL SWITCH SF 8TX |
FL SWITCH SFN 5TX |
FL SWITCH LM 8TX |
| |
| |
| Order summary |
 FL Switch SF - Low profile with high port density |
| FL SWITCH SF 8TX |
Unmananged switch, alarm contact for redundant power supply, operation range 0(32) - 55(131) Grad Celsius (Fahrenheit) |
8 |
0 |
135x94,3x30 |
2832771 |
| FL SWITCH SF 14TX/2FX |
s.a. |
14 |
2 |
205x115,3x30 |
2832593 |
| FL SWITCH SF 15TX/FX |
s.a. |
15 |
1 |
205x115.3x30 |
2832661 |
| FL SWITCH SF 16TX |
s.o. |
16 |
0 |
205x94,3x30 |
2832849 |
|
| |
|
|
| |
| |
| Order summary |
| FL Switch LM - Redundant with RSTP and wide temperature range |
| FL SWITCH LM 8TX |
Managed switch, redundancy with Rapid Spanning Tree Protocol (IEEE 802.1w), alarm contact for redundant power supply, operation range -40(-8) - 70(158) degrees celsius(fahrenheit) |
8 |
0 |
45x99x112 |
2832632 |
| FL SWITCH LM 4TX/2FX |
s.a. |
4 |
2 |
45x99x112 |
2832658 |
|
| |
|
